Revopoint INSPIRE: User-friendly Cost-effective 3D Scanner for 3D Printing

● Scanning Scenarios The INSPIRE is for hobbyists, 3D printing enthusiasts, and makers who want to scan medium-sized objects.
The RANGE is designed for professionals who want to scan large objects such as furniture, human bodies, and vehicles, ensuring efficient and thorough scanning results.
The MINI is designed for professionals who want to scan smaller objects such as jewelry, miniature figurines, or hardware components, providing precise detail-capturing capabilities.
The POP 3 is designed for professionals who want to scan medium-sized objects, such as engine parts or vases.
Recommend Scan Volumes:
MINI: 10 mm × 10 mm × 10 mm - 500 mm × 500 mm × 500 mm.
POP 3: 20 mm × 20 mm × 20 mm - 2500 mm × 2500 mm × 2500 mm.
RANGE: 50 mm × 50 mm × 50 mm - 4000 mm × 4000 mm × 4000 mm.
INSPIRE: 50 mm × 50 mm × 50 mm - 2000 mm × 2000 mm × 2000 mm.

INSPIRE’s IMU is a 9-axis IMU with a gyroscope, accelerometer, and magnetometer that all work together to help INSPIRE understand its location as you move the scanner around an object. This, in turn, helps INSPIRE to provide smoother frame stitching as well as helping to eliminate any faulty frames captured caused by shaking or moving too fast.

Magic Mat is a 50 cm × 50 cm black mat with highly reflective marker points across its surface that is designed to make scanning featureless objects much easier by removing the need to place marker points on the item.

No, the INSPIRE’s algorithms and internal chip do most of the processing.
Minimum specs: Intel i5, 8GB RAM.
Recommended specs: Intel i7, 16GB RAM.
No discrete GPU like an Nvidia or AMD graphics card is needed to use INSPIRE.

Yes, the INSPIRE comes with Revo Scan for free. It is compatible with iOS, macOS, Android, and Windows devices. In Revo Scan, you can perform scans and post-processing.

No, INSPIRE is only compatible with the Revo Scan software, which you can download from our website or your device's app store. However, the models generated by the scan are compatible with nearly all third-party 3D modeling software.

Marker points are stuck on or around objects without geometric features so the INSPIRE can track what it is scanning. When using Marker points, place them in irregular patterns with around 3-5 cm between the markers across the object you’re scanning, and ensure that there are 5 marker points always in the frame when scanning.

Connect the Mini turntable to either your computer or a plug to power it, then use the controls on the Mini turntable’s side.

No, repeated scanning makes your model worse. One scan close to the object will result in the best accuracy.

Yes, but it will not work well in direct sunlight. The INSPIRE is not water resistant, so avoid outdoor scanning on rainy days.